COLD GALVANIZING
CATHODIC PROTECTION

Rust treatment on steel beams and infrastructures

Allows the support to expand

Highly resistant in very corrosive environments

Slider

Highly resistant to climate changes
High plasticity
Does not crack or peel off
Highly resistant to impact
Product does not pollute the environment

RUST-ANODE PRIMER® can be applied to new supports, rusted supports and to supports previously treated by hot-dip galvanising.

RUST-ANODE PRIMER® does not require any chemical pickling prior to application.
It simply requires de-greasing and mechanical cleaning.

Slider

Permits the reinforcement of the cathodic protection of structures previously treated by hot-dip galvanisation

RUST-ANODE PRIMER® is very advantageous as the product can be DIRECTLY applied to the galvanised metal. In the case of hot-dip galvanisation, each metallic element must be treated separately in a zinc bath to strengthen its cathodic protection potential.

It acts as a corrosion inhibitor

RUST-ANODE PRIMER® cold galvanising is applied to the rust unless it is crumbling, transforming it into iron hydroxide and forming an electric connection via the layer, generating the required cathodic protection.

 

 Anti-corrosion product for cold galvanizing
 Cold galvanizing for the treatment of rust and corrosion

COMPLETE COLD GALVANIZING
RUST-PROOFING TREATMENT
PUR ZINC BASE
READY TO USE - SINGLE-COMPONENT

Slider
loading...
TS RUST-ANODE PRIMER en