COLD GALVANIZING
CATHODIC PROTECTION

Excellentes mechanical structures

Perfectly resistant to fresh water

Slider

Allows the support to expand
Highly resistant to climate changes
Does not crack or peel off
Very high resistance to impact and abrasion
Resistant to saline environments

RUST-ANODE PRIMER® acts as an active couple with the steel surface

RUST-ANODE PRIMER® can be used as a single layer. It • Allows cold galvanising on the majority of metals

Slider

Prolongs the life span of bridge and footbridge structures that have been treated by hot-dip galvanisation

RUST-ANODE® technology is an anti-corrosion treatment where zinc acts as an active couple with the surface of the steel. The product instantly generates new cathodic protection by galvanic anode which founds perfectly with the old galvanisation layer. Cold galvanising works on the majority of metals and alloys.

Cathodic protection that is more profitable than hot-dip galvanising.

In the case of hot-dip galvanisation, each element in the metallic structure has to be treated separately in a zinc bath to reinforce their cathodic protection potential.
RUST-ANODE PRIMER® is ready for use, and can be applied directly to the steel as a mono component paint. The advantage is that the metallic structure of the bridge does not need to be dismantled and can be ‘reinforced’ to maintain the cathodic protection for many years.

 

 Anti-corrosion product for cold galvanizing
 Cold galvanizing for the treatment of rust and corrosion

COMPLETE COLD GALVANIZING
RUST-PROOFING TREATMENT
PUR ZINC BASE
READY TO USE - SINGLE-COMPONENT

Slider
loading...
TS RUST-ANODE PRIMER en